Dynamic Assault Systems High Threat Carrier
Built for those who need a modular armor system that can be modified to fit the mission needs. This carrier takes some of the best features in the industry and puts them together in an off the shelf option that doesn't break the bank.
Features:
- Soft armor and ballistic plate compatible in one armor carrier system. This vest can be used with just soft armor and plates added as needed. Or run as a complete tactical entry vest holding both soft armor and plates in one system.
- Interior of vest is built using soft spacer mesh material for extra comfort and ventilation
- Plate pockets are built in a seperate pocket than the soft armor to make sure the soft armor is as flat as possible on the user and the plates push outward from the user to aid in comfort
- Adaptable shoulder straps. FirstSpear Tubes™ can be removed, so the user can run dual tubes, dual fixed, or one tube one fixed shoulders
- Back panel zippers that are compatible with Spiritus Systems zip on back panels. Other brands zip on panels may work, but this carrier was built to work with Spiritus Systems
- Laser cut MOLLE platform
- Tubes™ Rapid-Release Technology
- Front / Rear panels have built in stretch on the sides of the plate pockets to accommodate thicker stand alone or thinner in conjunction plates.
- Front / Rear plate pockets have internal plate retention straps. This helps keep the plates high and tight when using heavier plates.
- Updated laser cut placard holes compatible with QASM and G-Hook placard setups to include: Ferro Concepts, Haley Strategic, Spiritus Systems, RDR Gear, Velocity Systems, HRT Tactical, and others that offer similar setups.
- Built for department issuance. This vest has Velcro integrated into the lower abdomen area of the vest for use with industry standard placards. HOWEVER, unlike other placard compatible vests on the market this vest is also PALS / MOLLE slots integrated into the lower abdomen area so that pouches can be run instead of a placard without the need to purchase a MOLLE panel placard. **If you run your vest with MOLLE pouches, please remove the front placard buckles, dont be "that person" that leaves them on as they dont add any value running your kit this way.
- This vest has a 4"x6" front and 4x9" rear velcro loop areas for identification patches.
- The rear of the vest incorporates an updated trifold design allowing easy access to the cummerbund sizing area allowing for micro adjustments. This allows the user to go from a heavy jacket for the early morning raids, to a combat shirt in the afternoon and quickly adjust your vest to fit properly.
- The rear panel has a built in in elastic pocket for use with radios for those team leaders or task force members running dual radios and need to offset the placement of their secondary radio
- Low profile trifold padded shoulder straps give you the comfort you need without any unnecessary bulk. Easy to open and put on the carrier for a precise location fitment.
- Zippered admin pocket has been moved outside of the plate pocket to allow easier access and storage capabilities. No more issues with your stored items fighting for space with your plates.
- Laser cut exterior cummerbund has dual built in elastic pockets for use with radios, spare magazines, etc. The one closest to the front closure has an adjustable ride height to accommodate taller items without issues with clearances. If the users doesn't want to store anything in the elastic pouches then the shock cord retention can be removed and the elastic would go unnoticed to the user.
- The exterior cummerbund is soft armor compatible in standard 5" tall rectangular shapes if the user wants to have extra armor coverage. Or if they size down the carrier to limit the overlap of the soft armor
- Exterior cummerbund has a built in stiffener throughout to help with dispersing the load of the vest.
- Utilizes Raine Tactical Bridger Patent #10,314,355 the exterior cummerbund stiffener extends overtop of the cummerbund closure to allow one extra row of MOLLE for the user. No more wasted space due to using a Tube™ closure.
- The vest has a removable inner dual elastic cummerbund that helps hold the front and rear panels together on the sides. Some users have run this carrier with just the elastic cummerbund and have ditched the exterior cummerbund and the vest maneuvers the same way
Plate Sizing:
- SM HTCs: Fit SM SAPI (7.25x11.5)and MD SAPI (9.5x12.5), 8x10 and 10x12 Shooter/Swimmer Cut plates
- MD HTCs: Fit SM SAPI (7.25x11.5)and MD SAPI (9.5x12.5), 8x10 and 10x12 Shooter/Swimmer Cut plates
- Large HTCs: Fit MD SAPI (9.5x12.5) and LG SAPI (10x13.25), 10x12 Shooter/Swimmer Cut plates
- Extra Large: Fits LG SAPI (10x13.25) and XL SAPI (11x14)
- 2XL HTCs: Fit XL SAPI (11x14) plates
Cummerbund Sizing:
- The exterior cummerbund sizing will match the chosen size of the carrier
